IMAX B6AC IMAX B6 LiPro Balance Charger(Carton Pack)

~~$72.99~~ $74.99

Operating voltage range:
DC 11.0~18.0 Volt
AC in: 100v~240v
50/60Hz
Circuit power:
Max. Charge power 50W
Max. Discharge power 5W
Charge current range:
0.1~5.0A
Discharge Current range:
0.1~1.0A
Current drain for balancing Li-po:
300mAh/cell
NiCd/NiMH battery cell count:
1~15cell
Li-ion/Polymer cell mount:
1~6 series
Pb battery voltage:
2V~20V
Weight:
531g(Net Weight)
Dimensions:
133 x 142 x 36mm
Support battery
NiCd / NiMH
Voltage level : 1.2V / cell
Allowable fast charge current : 1C-2C (depends on the performance of cell)
Discharge voltage cut off level : 0.85V / cell (NiCd), 1.0V / cell (NiMH)
Li-ion
Voltage level : 3.6V / cell
Max. charge voltage : 4.1V / cell
Allowable fast charge current : 1C or less
LiPo
Voltage level : 3.7V / cell
Max. charge voltage : 4.2V / cell
Allowable fast charge current : 1C or less
Discharge voltage cut off level : 3.0V / cell or higher
LiFe
Voltage level : 3.3V / cell
Max. charge voltage : 3.6V / cell
Allowable fast charge current : 4C or less
Discharge voltage cut off level : 2.0V / cell or higher
Pb
Voltage level : 2.0V / cell
(Lead-acid) Max. charge voltage : 2.46V / cell
Allowable fast charge current : 0.4C or less
Discharge voltage cut off level : 1.75V / cell or higher

Optimized operating Software
iMax B6AC features the so-called Auto function that set the feeding current during the process of charging or discharging. Especially for Lithium for batteries, it can prevent the overcharging which may lead to an explosion due to the user’s fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users
Internal independent lithium battery balancer
B6AC employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal
Adaptable to various type of lithium battery
B6AC is adaptable to various types of lithium batteries, such as Li-ion, LiPo and the new LiFe series batteries.
Fast and storage mode lithium battery
Purpose to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ‘store’ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Automatic charging current limit
Customer can set up the upper limit of the charging current when charging your NiCd or NiMH battery, it is useful for the NiMH battery of low impedance and capacity in the ‘Auto’ charging mode.
Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the temperature limit is reached, the process will be terminated. * this function is available by connecting optional temperature probe, which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, it’s voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
Data store/ load
The maximum five batteries data can be stored for user convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
Cyclic charging/ discharging
1 to 5 cyclic and continuous process of charge> discharge or discharge> charge is operable for battery refreshing and balancing to stimulate the battery activity
Maximum safety
Delta-peak sensitivity: the automatic charge termination program works on the principle of the Delta-peak voltage detection.

1 x IMAX B6AC LiPo battery balance charger
1 x Multi-fuctional extension wire
1 x Universal crocodile clip
1 x JST plug
1 x Receiver plug
1 x English manual
1 x Plug Adaptor to suit your Country
COME WITH DETAIL MANUAL

This product was added to our catalog on Monday 02 March, 2009.

Customers who bought this product also purchased

RC Lab 10000 mAh 20C 7.4V Lipo-Battery	RC Lab 10000 mAh 20C 14.8V Lipo-Battery	RC Battery 35C 3000mAh 7.4v LiPo Battery
20x 100cm Servo extension cable	2pcs x 30C 2200mAh 11.1v LiPo RC Battery	4X 12g Servo metal gear Servo
EZRUN Brushless System Combo for 1/12 and 1/10 Cars (COMBO-B2)9T	battery safety bag 300 mm(L) X 230mm(W)	4X MG995+Accessories
Hobbywing UBEC 3A	20 Set x 4.0mm Gold Bullet Connector	Dynam Package 7g servo + Receiver 35MHz
RC Lab 4000mah 7.4v 15c Li-Po Li-polymer Battery	20 Set x 3.5mm Gold Bullet Connector	SG90 Servo
RC Brushless Motor Catamaran Boat--Sea Rider	HOLA 4 channels RC Helicopter	Receiver Battery Indicator Monitor Volt Watch
RC Lab 2450 mAh 35C 11.1V Lipo-Battery	15 set LAMA V3 V4 Main Rotor Blade(Black)